How much does siding cost in Columbus Ohio?

Homeowners in Columbus know that upgrading an exterior isn’t cheap, but it can deliver serious benefits: better energy efficiency, improved curb appeal and protection from harsh Ohio weather. I’ve researched the latest numbers, trends and expert advice to answer the big question: How much does siding cost in Columbus Ohio? The short answer is that most full siding projects fall somewhere between $12,000 and $43,800 for a typical house, but the final price depends on many factors. Below we’ll break down the specifics, compare materials, and share tips on saving money — all in one place.

Understanding the factors behind siding costs in Columbus

The wide range in estimates comes from the many variables that make each house different. House size and design are major drivers because two‑story homes with complicated rooflines and lots of windows need more materials and labor than a single‑story ranch. Siding material is another big factor: vinyl is the most affordable, engineered wood and fiber cement sit in the middle, and premium options like stone veneer cost far more. Labor costs also fluctuate with local wage rates, and the time of year matters because contractors often charge more during the busy spring and summer seasons. Finally, removing old siding and fixing any hidden damage add to the total bill, especially if your home has multiple layers to tear off or structural repairs to complete.

Average siding replacement costs in Columbus

For a rough baseline, siding replacement on an average 1,945 sq ft home in central Ohio often costs around $27,900. Homeowners across the state typically spend between $12,000 and $43,800, depending on the home’s square footage, number of stories, architectural complexity and material choices. In Columbus and surrounding suburbs, most projects land in the low‐to‐mid $30 k range. A quick online calculator lets you select your house style, number of stories and size to see a ballpark figure, but nothing replaces a professional quote.

City‑by‑city comparisons

Prices vary across Franklin County and beyond. Smaller cities with modest home sizes can come in below $20,000 for basic vinyl, while premium materials on large homes can climb past $40,000. Here’s a snapshot of average replacement costs:

Note: These figures assume commonly used materials such as vinyl or fiber cement. Stone and brick veneer add a significant premium.

Siding material costs and options

Choosing the right cladding affects both your budget and your home’s long‑term performance. Here’s a quick comparison of installed costs for a 2,000 sq ft project:

‍‍

‍

Vinyl siding is the budget leader and remains the most popular option. It’s a low‑maintenance PVC product available in many colors and styles; basic clapboard panels can keep total costs under $10,000 on a simple single‑story home. Premium or insulated vinyl products provide better energy performance and thicker profiles but usually stay within the $12 k–$16 k range for a 2,000 sq ft project. When budgeting for siding installation, remember that trims, fasteners, sealants and housewrap are part of the total package.

Fiber‑cement siding (often sold as Hardie® board) is durable and fire‑resistant, mimicking the look of wood clapboards or shingles with less upkeep. Installation for a 2,000 sq ft home normally runs in the mid‑teens to low $20 k range, while high‑end fiber‑cement products can cost $15 k–$25 k. In Columbus, fiber cement holds up well to freeze–thaw cycles and provides good resale value.

Engineered wood siding uses wood fibers bonded with resins to create a lighter, pre‑primed product. It offers a real‑wood appearance for less than natural cedar and usually falls between vinyl and fiber cement in price. Expect to spend $14 k–$24 k to side a 2,000 sq ft home with engineered wood.

Wood siding offers timeless charm but comes at a premium due to the material cost and labor‑intensive installation. Pine or spruce lap siding may start around $15 k, while cedar shakes or hardwoods can push a 2,000 sq ft project into the $25 k–$30 k range. Regular painting and maintenance are required to keep wood looking its best.

Metal siding, including aluminum and steel, can provide a modern look or even mimic board‑and‑batten and log‑style panels. Aluminum siding might cost $8 k–$15 k for a 2,000 sq ft home, while steel typically runs $15 k–$20 k due to its weight and installation demands. Both options resist fire and pests, but steel can dent or rust if not properly coated.

Stucco and stone veneer cater to specific styles. Stucco is popular in southwestern‑style homes and costs about $14 k–$20 k for 2,000 sq ft. Stone veneer delivers high‑end curb appeal but is by far the most expensive siding material, ranging from $24 k on the low end to $50 k or more depending on whether you choose manufactured panels or individual masonry‑installed pieces.

How much does siding cost for a 2000 sq ft house in Ohio?

The burning question many owners ask is: How much does siding cost for a 2000 sq ft house in Ohio? A good rule of thumb is to budget between $10,000 and $25,000 for most materials and labor. Nationally, homeowners often spend in the $15 k–$18 k range for vinyl or fiber‑cement siding on a 2,000 sq ft home. In central Ohio, a full siding replacement on a house this size usually runs between $11,000 and $17,000 for standard vinyl or fiber‑cement installations. Premium options or more complex homes can easily exceed $20,000.

That price assumes you’re starting fresh or the existing siding is easy to remove. If old cladding has to be torn off, expect to add $1–$3 per square foot for demolition and disposal. Removal costs range from about $2,000 to $6,000 on a 2,000 sq ft job and will be higher if you’re dealing with multiple layers or heavier materials like cedar or fiber‑cement. Choosing an experienced contractor for siding installation will help you understand these variables and avoid surprises.

Factors that raise or lower the price

• Material quality: Higher‑grade vinyl, fiber‑cement, engineered wood and premium trims add to the cost but often deliver longer lifespans and better warranties.
• Story count & design complexity: A single‑story ranch is faster and cheaper to side than a two‑story home with gables, dormers and lots of trim details.
• Labor and region: Columbus enjoys competitive labor rates compared to national averages, but supply shortages or peak season demand can still bump prices.
• Removal & repairs: Replacing siding means you’ll pay to tear off the old material. Hidden damage (rotted sheathing or framing) discovered during removal must be fixed before new siding goes up.
• Insulation: Upgrading to insulated vinyl or adding foam sheathing underneath improves energy efficiency but increases upfront costs. Insulated vinyl siding typically costs $6–$12 per square foot, meaning a 1,000 sq ft home with insulated panels might run $6,000–$12,000 before labor.

How much does siding cost for a 2000 sq ft house?

The numbers above apply broadly across the U.S., but local conditions matter. According to a national siding cost calculator from Modernize, a mid‑range siding project for a 2,000 sq ft home in 2025 averages $17,200, or about $8.60 per square foot installed. This estimate includes the five most common materials (vinyl, metal, wood, fiber‑cement and stucco) and highlights how national averages can differ from Columbus pricing. Always remember that costs can swing higher if you choose a premium product or live in an area with higher labor rates.

If you need a deeper dive into specific costs for your home’s layout, the How much does 2000 sq ft of siding cost? article at 614 Exteriors offers a thorough breakdown of material comparisons, regional pricing and removal expenses. It’s a must‑read for homeowners planning a major exterior project.

How much is insulated vinyl siding for a 1000 sq ft house?

Insulated vinyl siding pairs the low‑maintenance advantages of PVC with built‑in foam backing that improves thermal performance. In Columbus, materials alone generally cost $6 to $12 per square foot, so a 1,000 sq ft project comes in around $6,000–$12,000. Add labor (roughly $2–$5 per square foot) and you’ll likely spend $8,000–$17,000 for a complete installation, depending on trim options and home complexity. While insulated panels are more expensive than standard vinyl, they can lower energy bills and may qualify for energy‑efficiency incentives.

How much does it cost to build a 2000 sq ft house in Ohio?

For perspective, siding is just one slice of a much bigger pie when you’re building from scratch. According to Home Nation’s 2025 new‑construction data, the average cost to build a 2,000 sq ft house in Ohio ranges from $200,000 to $350,000, or roughly $120–$200 per square foot. Urban areas like Columbus and Cleveland trend toward the higher end due to greater demand and higher labor costs, while rural areas may see lower land prices but higher site‑prep expenses. By comparison, a vinyl siding repair or full siding installation represents a small fraction of the overall building budget.

Tips to manage siding costs and save money

• Get multiple quotes. Prices can vary widely between contractors. Gathering at least three detailed bids lets you compare materials, warranties and labor breakdowns.
• Schedule wisely. Off‑season installations (late fall or winter) can sometimes secure lower labor rates. Just ensure the weather is suitable for your chosen material.
• Bundle projects. If you’re also replacing your roof or gutters, ask contractors about package deals. Bundling exterior work can save on mobilization costs and improve curb appeal in one coordinated effort.
• Invest in quality. Cheaper siding may seem attractive, but higher‑grade vinyl or fiber‑cement can last decades longer and boost resale value. It often pays off over time.
• Work with local experts. Local companies understand Columbus building codes, permit requirements and climate challenges. They can help you navigate HOA rules and deliver a result that stands up to Ohio’s freeze–thaw cycles.

Choosing the right contractor in Columbus

Selecting a siding professional isn’t just about price. Look for licensed, insured contractors with strong local references and experience in siding installation and siding repair. Ask to see photos of completed projects and review warranties for both materials and workmanship. A knowledgeable partner will guide you through material options, help you choose finishes that complement your home, and provide accurate timelines so you know what to expect.

Conclusion

So, how much does siding cost in Columbus Ohio? Most homeowners can expect to invest somewhere between $12,000 and $43,800 for a full siding replacement, with the typical Columbus project hovering around $27,900 for an average‑sized house. The final price depends on your home’s size and design, your choice of material, labor rates and whether you’re replacing old siding or starting fresh. By understanding these factors, comparing options and partnering with a trusted installer, you can balance budget with beauty and long‑term durability. Whether you choose classic vinyl, modern fiber cement or eye‑catching stone veneer, new siding is a worthwhile investment that protects your home and boosts its value.

‍